Electrifying ironmaking: The potential of direct electrolysis for iron ore
This briefing note evaluates direct iron electrolysis for decarbonising steelmaking, focusing on low-temperature electrowinning, molten salt, and molten oxide pathways. While offering potential for using lower-grade ores with fewer infrastructure requirements, the technology faces significant scalability hurdles, low technology readiness, and high capital costs compared to hydrogen-based routes.
Please login or join for free to read more.
OVERVIEW
Introduction
Iron production has historically relied on carbon-intensive processes where fossil fuels generate carbon monoxide and hydrogen to extract oxygen from iron ore. An emerging alternative is direct iron electrolysis, an electrochemical process that utilizes electrons instead of fossil fuel-derived agents to produce metallic iron. While this approach has long been established for metals such as aluminium, copper, and zinc, it has not yet reached commercial scale for iron despite being patented as early as 1906. However, direct electrolysis is gaining significant attention as a potential pathway for deep decarbonisation within the global steel industry, offering a solution for near-zero-emissions iron production when powered by clean electricity.
Technological pathways
Direct electrolysis technologies are primarily classified by their electrolyte type and operating temperature. Low-temperature electrowinning involves aqueous electrolytes (acidic or alkaline) operating between room temperature and 120°C. While these systems benefit from simple configurations, they face challenges such as limited iron solubility and the competing hydrogen evolution reaction (HER), which reduces efficiency. Molten salt electrolysis (MSE) operates at intermediate temperatures between 400°C and 900°C, allowing for more rapid reduction. Molten oxide electrolysis (MOE) represents an ultra-high temperature pathway, operating above 1,538°C to produce liquid iron directly. MOE allows for the separation of impurities as slag, similar to conventional methods, but requires durable materials to withstand extreme temperatures and corrosive environments.
Key technology developers
Several commercial entities are advancing these pathways toward demonstration scale. Boston Metal is a leading developer of the MOE process, having raised more than USD 500 million in equity from investors including BHP, Vale, and ArcelorMittal. The company recently commissioned a multi-inert anode industrial cell in Massachusetts but faced a setback at its Brazilian facility due to material leakage at 1,600°C. Electra, founded in 2020, focuses on an aqueous acidic electrolysis (AAE) process and has secured approximately USD 351 million in funding. Its pilot plant in Colorado produces solid iron plates at 60°C. Other developers include Volteron, a joint project by ArcelorMittal and John Cockerill, which aims to commission a 40–80ktpa plant by 2027, and Australian firms Fortescue and Element Zero, which are exploring direct electrochemical reduction and MSE respectively.
Energy consumption
The theoretical minimum energy required to decompose hematite into iron and oxygen is 1.83MWh per tonne of iron. In practice, requirements are higher due to process inefficiencies and heat losses. Pilot results suggest that practical electricity consumption for direct electrolysis will likely range between 3 and 4MWh per tonne of crude steel. Reported laboratory and pilot data show specific consumption ranges of 2.7–6.0MWh/t for electrowinning and 4.5–6.0MWh/t for MOE. While these figures are comparable to conventional routes like gas-based direct reduced iron (gas-DRI) at ~2.8MWh/t and blast furnace production at ~4.5MWh/t, the total volume of electricity required at commercial scales remains a substantial challenge.
Firmed renewable electricity cost
The viability of electrochemical ironmaking depends on low-cost, reliable renewable power. Ensuring a steady supply requires ‘firming’ intermittent sources like wind and solar with energy storage. According to a July 2026 report, firming costs in the US range from USD 8 to USD 62/MWh, leading to a total levellised cost of firmed renewable electricity between USD 70 and USD 167/MWh. However, costs are declining; the price of lithium-ion batteries dropped from USD 827/kWh in 2013 to USD 108/kWh in 2025. Modelling by the International Renewable Energy Agency suggests firmed solar PV and storage costs could fall below USD 50/MWh at high-performance sites by 2035.
Process flexibility and consumption management
Operational flexibility offers a potential advantage for electrolysis, particularly for low-temperature processes that can adapt to variable renewable generation. Aqueous electrowinning can ramp down during peak price periods and operate in cathodic protection mode at 10% of operating current during interruptions, maintaining a faradaic efficiency of 89%. In contrast, high-temperature MOE processes are less tolerant of power interruptions, as molten iron could damage the electrolytic cell. This flexibility allows producers to participate in demand-side response programmes and utilise negative wholesale electricity prices, potentially reducing the need for significant investment in firming infrastructure.
Economics of electrochemical ironmaking
Primary cost drivers include electricity, iron ore, and capital expenditure (capex). Currently, estimates for first-of-a-kind (FOAK) plants are high, with the levellised cost of steel (LCOS) for MOE estimated at USD 1,948/t and AAE+EAF at USD 1,060/t. However, as technologies reach nth-of-a-kind (NOAK) status, they are expected to become more competitive. Under a scenario with electricity prices at USD 95/MWh, electricity accounts for 40–50% of production costs. At lower electricity prices, such as USD 35/MWh, aqueous electrowinning processes could be cost-competitive with alternative low-emissions technologies like hydrogen-based DRI (H2–DRI).
Technical and commercial challenges of electrochemical ironmaking
Technology readiness remains low, with most projects currently at TRL 4. Scalability is a major barrier; current industrial cells produce only 1–2 tonnes per month, whereas commercial production requires capacity in the millions of tonnes. Transitioning to commercial scale will require thousands of cells operating simultaneously and an increase in cell capacity linked to higher electrical currents. Boston Metal plans to scale from 25kA cells to 600kA cells to support 1MTPA production. Fundamental technical hurdles still include low iron oxide solubility, maintaining electrolyte stability, and developing durable anode materials that can withstand oxygen-rich, high-temperature environments.
Electrochemical ironmaking future
Direct electrolysis is likely to lag behind hydrogen-based steelmaking in terms of industry adoption and commercial readiness. Most net-zero studies do not anticipate a significant contribution from these technologies by 2050. However, the technology offers unique niche advantages, such as the ability to use lower-grade magnetite ores (as low as 35% Fe) with minimal processing and requiring less energy-related infrastructure. Electrowinning processes could require approximately 1 tonne (or ~28%) less raw material per tonne of steel than conventional blast furnace routes. Consequently, it may establish a significant role in smaller-scale green iron production, particularly in regions with abundant renewable resources and access to lower-grade ores.